valve body
英 [vælv ˈbɒdi]
美 [vælv ˈbɑːdi]
阀体
双语例句
- Valve body and internal parts: anodized aluminum alloy, copper.
阀体和内部零件：阳极电镀铝合金、铜。加固端盖：塑料。 - Push spacer sleeve No.11 onto the valve body.
将隔套编号11推到阀体上。 - Diaphragm valve body flow smoothly, cutting components for the elastic diaphragm, valve cover stuffing.
隔膜阀体流通平滑、节流元件为弹性隔膜阀，阀盖上无填料函。 - Install new retainer module assembly into valve body by aligning "U" shaped cutout in retainer with the valve outlet.
通过对齐护圈上和阀门出口的“u”形切口，将新的护圈模块总成装配到阀体内。 - At the same time, the stress analysis of the control valve body was shown by considering the fluid-structure interaction.
同时，在考虑流固耦合作用下对控制阀阀体进行了应力分析。 - This construction avoids the need for extending the pivot pins through the valve body.
这种结构消除了将枢轴销伸长穿出阀体的必要性。 - The check valve by adopting the seal structure has great sealing effect, and the leakage between the valve body and the valve clack can be effectively prevented.
采用上述密封结构的止回阀有良好的密封效果，能有效地防止阀体和阀瓣之间的泄漏。 - Material of valve body shall be forged or cast steel and provide sufficient weldability.
阀体材料应是锻钢或铸钢并应有充分的可焊性。 - The interface between the valve core and the valve body is a conical soft metal interface.
所述的阀芯与阀体之间接触面为锥面软金属接触面。 - The valve body acts as a built-in actuator, eliminating costly hydraulic, pneumatic, or electric operators.
阀体就好像是一个内置执行机构，这样就无须价格昂贵的液压、气动或电动执行器。 - What usually happens is that the spring corrodes to the stem and valve body and becomes immovable.
通常发生的是弹簧同阀杆和阀体腐蚀在一起，变得无法移动。 - The thimble and valve body has the thread connection, the place around the thimble has the flange.
顶针与阀体用螺纹连接，顶针的周边做有凸缘。 - Both the retainer side and the body side seats are locked into the valve body.
定位装置的侧面和阀体侧面阀座都锁定在阀体内。 - The valve body of the valve is provided with upper and lower two valve cores.
该阀的阀体内配有上、下两个阀芯。 - The wellhead throttle valve is made up of nozzle, plunger-shaped spool, throttle value, valve body and valve rod, etc.
该井口节流阀由喷嘴、柱塞形阀芯、节流轴、阀体、阀杆等组成。 - Check modules are installed in the valve body with the seats facing the valve inlet.
安装在阀门内的止回模块其阀座应该面对阀门进口。 - Do not allow any pipe dope into valve body in order to avoid damage to disc and seat.
不要让任何管道粘接剂流入阀体内，以避免损坏阀瓣和阀座。 - The combined type valve body is divided into an outer type valve body or a built-in type valve body.
上述组合式阀体分外装型阀体或内装型阀体。 - The valve body and disc of valve shall be made of ductile cast iron.
阀门的阀体、阀板制造材料应该是球墨铸铁。 - The valve body has been designed to handle the weight of the pump on vertical in-line installations.
这种阀体适用于承受垂直直线安装的泵的重量。 - Typically, a control valve body has a close resonance frequency to the pipe system.
通常，控制阀阀体的共振频率和管道系统比较接近。 - Vent the piping and test valve body cavity to remove air or steam.
排放管道和试验阀门体腔内的空气或蒸汽。 - The top of retainer must drop just below threads in the valve body.
固定器的顶部必须刚好位于阀体内螺纹下方。 - Is suitable for through flange valve sealing pressure and valve body intensity pressure performance test.
适用于直通法兰式阀门的密封压力和阀体强度压力性能试验。 - The globe valve valve body can be whole as well as be sectional.
球阀阀体可以是整体的，也可以是组合式的。 - Install valve in the direction of the flow arrows on the valve body.
按照阀体上的箭头方向安装阀门。 - Bellows assembly is welded to the valve seat and the bonnet assembly to isolates the fluid stream inside the valve body from the atmosphere outside the valve body.
焊接于阀座和阀帽之间的波纹结构使阀门内流体和阀门外大气隔绝。 - Turn handle to be perfectly perpendicular to valve body.
将手柄旋转到与阀体完全垂直的位置。 - Research on Technique of Electrochemical Deburring Machining for Injector Orifice of Needle Valve Body
针阀体喷孔电解去毛刺工艺和技术的研究